8 Katom St., Misgav Industrial Park, 2017400, Israel
Tel: +972-4-9951999; Fax: +972-4-9990287
PM0617.08 - CXE2000/CXE3000 CompletePBX Getting Started Guide (electronic version)
Page
5
of
7
Fig. 3 – BRI/PRI Panel (allows up to additional 24 FXS ports)
LED Label Indication
PHONE
This yellow LED indicates that the CXE2000/CXE3000 is supplying the necessary
voltage for analog or ISDN telephone sets.
SYNC
This green LED is the synchronization. It blinks once the CXE2000/CXE3000 is
synchronized with the telephony modules.
ACTIVE
This red LED lights up when at least one PSTN / Analog phone is active.
ON
This green LED lights up when the CXE2000/CXE3000 is powered.
Analog (FXS and/or FXO) CXE2000/CXE3000
These models do not have digital modules and therefore have a different set of indicators, as
described in
Fig 4
:
Fig 4. All-Analog Panel
The functionality of the LED indicators is the same, with two exceptions:
1.
All the indicators are Red.
2.
The Phone indicator is replaced with H/W LED, indicating hardware failure (when on).
Port Status LED (Light Emitting Diode) Indicators
The CXE2000/CXE3000 has a single green LED status indicator for analog ports (
Fig. 4
). The
Red LEDs are NOT USED for line status indication), and there are two LED indicators for digital
ports.
FXS ports: The Green LED is on for off-hook status. It blinks when the phone rings.
FXO ports: The Green LED is on for off-hook status. It blinks when the line rings.
BRI port (
Fig. 4
): Solid green indicates that the port is configured as TE. Solid yellow indicates