11
EN
Thema:
Installation
Important! The USB port is not
designed for charging the smart-
phone via USB cable.
!
AUX input
The AUX input is a 3,5 mm jack plug on
the front operating panel.
Herewith you can connect the unit with
on of the external playback devices:
MP3 player, smartphone, cellphone or
tablet PC.
An adapter cable 3,5 mm jack-to-jack
will be required.
If the external device is connected with
the unit, the playback is audible via car
radio loudspeakers.
The playback control can be achieved
via external device only.
Factory settings
Pressing the
F
RST
button (see page
8) button you can set the unit back to
the factory settings.
Use a pencil or similar to press the
button. After reset the unit shuts down
automatically.
Unit on/off
Press the
?
/
MOD
/
U
button to turn the
unit on.
If the unit is already on, keep the
button pressed for a couple of seconds
to turn it down.
Insert a SD card
Insert a SD card into the slot with the
label side to the up and the pin side to
the down.
Make sure that the card is intact and
dirt-free.
Insert a USB flash drive
Insert an USB flash drive proper into a
USB plug.
Do not insert any heavy or big USB
flash drives in order not to hit it
accidently - it could cause damages of
the USB plug or USB flash drive.
Micro SD cards and USB flash
drives should have following file-
system format: FAT32. Other types
will not be supported.
i
