background image

EN

Topic: 

Safety instructions and precautions

4

XOMAX

https://www.xomax.de

!

 Replacement of fuses

While replacing the fuse please make 
sure that the new fuse has the same 
properties as the old one, especially the 
amperage.

!

 Overheating

Do not occlude the vent holes to avoid 
the heat generation and accumulation 
in the unit. Otherwise exists the danger 
of fire.

!

 Regular temperature

Please make sure that the temperature 
inside the vehicle is not less than 0° C 
and not more than +40° C. 

If it's too cold or too hot inside of the 
vehicle, do not turn the unit on until 
the inside temperature of the cabin 
descends.

!

 Cleaning of the unit

Please keep the unit clean and remove 
the dust from it regularly. Please use for 
that a soft and dry cleaning rag.

 

 

Major soilings can be removed carefully 
with the wet cleaning rag. Do not use 
any chemical or alcohol-containing 
detergents to avoid the damage of the 
unit's varnish.

!

 Moisture

To avoid the danger of fire or the 

electric shock do not put the unit in to 
the moist environment (e.g. adverse 
weather conditions, inappropriate wet 
cleaning etc.)

Summary of Contents for XM-CDB624



















Reviews: