5
EN
Topic:
Installation
Installation
WARNING!
Please read these advices carefully
before installation procedure.
The damages caused by an inappropriate
installation are not covered by warranty.
To avoid the risk of losing the warranty
please let a specialist accomplish the
installation of the unit.
»
To avoid a short circuit please
disconnect the vehicle battery before
the installation. To do it properly please
read the manual of the vehicle.
»
Please be aware that this unit has an
Double-DIN standart size. Make sure
that your vehicle is equipped with an
installation cell of required size.
»
As may be the case you will need a
suitable faceplate, adapter or other
accessories. These could be provided
from your local specialist supplier.
»
The connection cables may not be
cutted or short-circuited. Otherwise the
warranty becomes invalid.
»
Before the installation please make
sure that the vehicle has the 12 Volt
on-board power supply.
We recommend you to let a
professional technician install the
unit in your vehicle.
!
!
»
The minus (-) should be connected
with the ground (GND) (negative).
»
Please tag the polarity of the avai
-
lable speakers before you disconnect
the vehicle battery.
»
A proper grounding of the unit's
housing requires a clean ground
connection. Thus the grounding area
should be rust-, stain- and dust-free.
»
Please ground the cable separately
from other heavy current devices such
as an amplifier etc.
»
Please ensure that the coloured
cables are connected according to the
wiring diagram. The wrong wiring may
lead to malfunctions or even damages
of the electric elements of the vehicle.
»
Please note that the connection
cables of this unit and of the other
devices may have the same purpose
but the different colour. For this reason
while connecting this unit with the
other devices please ensure that both
of the cables in each case have the
same purpose. To configure everything
correctly please refer to the manuals of
the both devices.
»
Please ensure that the negative
speaker cable is in each case plugged
into the negative speaker socket of the
ISO interface. Do not ever connect the
negative speaker cables with the vehicle
body.
»
This unit is designed and construed
for connection with 4 speakers. Do not
combine this unit with devices that are
designed and construed for connection
