reversing the door
Your XO Ice Maker is shipped with the door hinge on the right hand side.
Reversing the door is easy, simply follow these steps, you will need a #2 Phillips Head Screwdriver.
1. While supporting the door, remove the two (2) screws
(shown in RED) that hold the Top Hinge in place.
Then remove the door by lifting it straight up.
2. Remove the two (2) screws that hold the Bottom Hinge in
place. Remove the two (2) corrosponding screws on the left
hand side. Install the Bottom Hinge in the left hand position
and install the remaining two (2) screws into the holes on the
right hand side.
.
BOTTOM HINGE
RIGHT HAND
POSITION
LEFT HAND
POSITION
TOP HINGE
RIGHT HAND
POSITION
LEFT HAND
POSITION
15
