Xo XOCYLI ISLAND XOCYLI16BC, Manual

Page: 13 / 68

- 13 -
24” to 32”
installation
1 2
3
Please note!
Before beginning the assembly procedure, for easier cooker hood handling, open
the packaging, remove the cooker hood and place it on a convenient surface.
Open the panel by pressing the point indicated in Fig. 1 .
Remove the aluminium panel by pulling the handle as indicated in Fig. 2 .
The product is supplied pre-assembled. To install it, proceed as follows: remove the
structure from the packaging and remove the 2 screws A to separate the upper part
from the lower part ( Fig. 3 ).
• Position the drilling template on the ceiling, making sure that the arrow is on
the right-hand side in relation to the appliance controls, as indicated in Fig. 4 .
• Make 4, Ø8 holes in the ceiling and drive in 3 screws without completely tight-
ening them. Pay attention not to insert the screw into the hole marked with an
4