D.
OPERATION CONTROLS
D1.
Mode Switch Panel
The green lamp turns on as soon as the unit is switched ON by means of the main ON/OFF
switch at the rear of the control box.
Finger touch-switches:
COAG-switch: Turns blue lamp on and off.
- Blue lamp ON means coagulation mode (COAG-mode) with
handpiece ready to operate.
- Blue lamp OFF means standby mode (ST.BY-mode) with
handpiece inoperative.
CUT-switch: Turns yellow lamp on and off.
- Yellow lamp ON means cutting mode (CUT-mode) with
handpiece ready to operate.
- Yellow lamp OFF means standby mode (ST.BY-mode) with handpiece inoperative.
D2.
ON/OFF Finger Switch
ON:
Press and hold the rubber ring
between fingers
(acoustic signal).
OFF:
As soon as released.
NOTE!
The finger switch is only
operative in the active
modes i.e. in the CUT
mode or in the COAG
mode.
6
