C.
SET-UP
Your XO ODONTOSURGE comes complete with control box, handpiece and cord, casing
including a selection of 7 different instruments, and a mains power cord.
C1.
Handpiece and Cord
1. Connect the handpiece with the matching connector at the end of the handpiece cord.
2. Connect the opposite end of the handpiece cord with the matching connector at the
rear of the control box.
3. Clip the handpiece in place by pressing it laterally into the handpiece holder.
C2.
Handpiece holder
1. Attach the handpiece holder by inserting its tongue into the slot in the side of the control
box (left or right side at option).
C3.
Control Box
1. Check that your unit is correctly rated for your local power line supply voltage (see rear
of the control box).
2. Connect the power cord with the matching power inlet on the rear of the Control box,
and plug into a wall socket with appropriate protective ground connection.
NOTE!
Should your unit not be equipped with the appropriate power cord (i.e.
pins different from your local standard) contact your dealer and/or au-
thorized service engineer.
3. Your unit is now ready to be switched ON by pushing the main ON/OFF switch on the
rear of the control box.
5
