175
The timing of email delivery and retrieval can be adjusted with "polling and delivery
schedule". You can optimise the corresponding parameters depending on the type of
your Internet connection.
Which service do you want to configure?
-
local and internal domains
Please read on at
(p. 175)
-
mail filters
Please read on at
(p. 179)
-
mail reception
Please read on at
(p. 184)
-
polling and delivery schedule
Please read on at
(p. 189)
Domains
SX-GATE can be responsible for multiple local and/or internal domains.
A table gives you an overview of all available objects. If there are more than 10 entries,
a navigation bar will appear below the right bottom hand corner of the table where you
can page through the entries or open the table in fullscreen mode. Pick an entry by
clicking either its title or the pencil icon to enter the detail view. Add new objects by
clicking "New Entry" below the table on the left. Use the dustbin icon to delete entries.
Email domain
Please enter an email domain. Mails to this domain are either going to be delivered to
a local mailbox on SX-GATE or forwarded to an internal mail server.
Domain type
Deliver mail to
Select "to SX-GATE mailbox" if you want SX-GATE to be your local mail-server. Emails
to all the domains that you can specify later in this wizard will then be delivered to
mailboxes on SX-GATE. Users can access their emails using the SX-GATE webmail
client or with any mail client supporting the POP3 or the IMAP4 protocol.
To create a user mailbox on SX-GATE you have to add a user at
"System > User administration > Users" and assign him to group
"system-mail".
In case you already operate a mail server in your LAN and you want to keep on using
it, SX-GATE can forward all emails addressed to specific domains to this internal mail
