160
VDSL via VLAN
Enter a VLAN ID for VDSL Internet connections using VLAN. Then tagged VLAN
packets are used to connect with the DSL modem. Please ask your provider for the
correct VLAN ID.
Please read on at
Internet IP address
SX-GATE Internet IP address
In case of a leased line connection, the provider usually installs a router and gives you
a block of IP addresses. The provider then already assigned one address to the router.
Assign an other one to SX-GATE.
Cable modems in contrast usually assign an IP by DHCP.
SX-GATE Internet IP address
-
enter static IP (Internet via router)
Please read on at
(p. 160)
-
Obtain IP from DHCP (Internet via cable modem)
Please read on at
(p. 162)
IP address
Use the second network card of SX-GATE (eth1) to establish the Internet connection
via router. This network card may not be used for any other purpose.
Link the Ethernet port of the external router directly with SX-GATE by using a crossover
cable. Alternatively, you can connect SX-GATE and the router via a separate hub or
switch. You may connect only those devices to the hub or switch which have to be part
of the transfer network between SX-GATE and the router.
Please note that the ip addresses entered here may not be
part of the address range configured for your LAN. If you
use for instance the subnet 192.168.0.0 with a netmask of
255.255.255.0 for your LAN, the addresses entered here may
not begin with 192.168.0 as well.
