Xmotos XZ 250R, Owner'S Manual

Page: 22 / 78

22
Speedometer and Odometer
The digital speedometer indicates the road speed of the
motorcycle. The read-out displays the motorcycle road
speed in increments of one kilometer (or mile) per hour.
In the speedometer face is the electronic odometer and
one trip meter.
(A) Multi-Function Display (1) Turn Signal Indicator Lights
(B) Indicator Lights (2) Neutral Indicator Light
(C) Odometer/Trip Button (3) High Beam Indicator Light
(D) Mph/Km-h Button
Turn Signal Indicator Lights
When either the right or left turn signals are being operated, the indicator light will flash intermittently.
NOTE: If a turn signal light is not operating properly due to bulb filament or circuit failure, the indicator
light flickers more quickly to notify the rider of the existence of the failure.
Neutral Indicator Light
The green indicator light will come on when the transmission is in neutral. The light will go out when you
shift into any gear other than neutral.
High Beam Indicator Light
This blue indicator light will be lit when the headlight high beam is turned on.
Gear Position Indicator
The gear position indicator displays the gear position. When the
Transmission is in gear, the relevant gear number 1 to 6 will be displayed.
Speedometer
The speedometer indicates the road speed in kilometers per hour and
miles per hour. (Note: Select km/h or mph as appropriate, to comply with traffic regulations. Press button
to switch between km/h or mph.)
Odometer
The odometer registers the total distance that the motorcycle has been ridden.
Trip Meter
To reset the trip meter to zero, push the odometer/trip button
for 3 seconds. The display will show “000.0” after reset.
1 2 3 4 5 6
00
00000.0
MPH
KM/H
GUAGES, INDICATORS & DISPLAY
1 2 3 4 5 6
00
00000.0
MPH
KM/H
1 2 3 4 5 6
00
000.0
MPH
KM/H