18
Left Handlebar Switches
Electric Start Button
Use this button to operate the starter motor. With the
key ignition switch in the “ON” position, the engine stop
switch in the “RUN” position , and the transmission
in the neutral position, pull the clutch lever and push the
electric start button to start the engine.
Engine Stop Switch
In position the ignition circuit is off. The engine cannot
start or run.
In position the ignition circuit is on and the engine can
start or run.
Headlight / Dimmer Switch
In position the headlight low beam and tail-light turn
on.
In position the headlight high beam and tail-light turn
on. The high beam indicator light also turn on.
Turn Signal Light Switch
Moving the switch to the “ “ position will flash the left
turn signals. Moving the switch to the “ “ position will
flash the right turn signals. The indicator light will also
flash intermittently. To cancel turn signal operation, push
the switch in.
Horn Switch
Press the horn switch to sound the horn.
Fuel Fill Cap
To Open:
Turn the cap counter-clockwise.
To Close:
Turn the cap clockwise, make sure the breather
tube is installed.
OPERATING CONTROLS
(ON-ROAD)
FUEL FILL CAP
Summary of Contents for XZ 250R V4
