XMOS xCORE VocalFusion, Getting Started, Page: 2 / 22

Getting started with xCORE VocalFusion Speaker 2/22
· Microphone board - Linear or circular with ribbon cable
Figure 2:
C43
microphone
board
Figure 3:
L33
microphone
board
· xTAG
- connects to the xTIMEcomposer tools so you can load application binaries
onto the target board
Figure 4:
xTAG
· Two micro-USB cables - one cable provides connection to the baseboard, the
other connects the xTAG debug adapter to a host computer
· xTIMEcomposer - the development tools provide everything you need
to program, debug and simulate your applications; download free from
http://www.xmos.com/tools
2
· XMOS VocalFusion firmware download - (1.1.1 or later). Available from
http://www.xmos.com/vfspeaker
.
· A host computer with two USB ports - macOS and Windows are supported for
USB configurations. For I
2
S configurations an audio source with an I
2
S master
interface providing a 24.576MHz MCLK is also required
2
Requires an xmos.com account
XM011320A