Getting started with xCORE VocalFusion Speaker
Figure 14:
Flash
configuration
for erase,
page 1
The erase command is listed in §
. An alternative to using the command line is
to create a pseudo flash configuration in xTIMEcomposer.
·
Select
Run
·
Flash Configurations
(Figure
). In
Flash Configurations
, double-
click
xCORE Application
.
·
Now select the application’s XN file for
C/C++ Application
; click
Browse
and
navigate to:
app_vf_spk_base/src/core/vfspk_base_usb.xn
·
Switch to
XFlash Options
tab (Figure
), and enter the following in
Other
XFlash Options
:
--erase-all --target-file
·
Check that Target is set correctly. If this is not the case, ensure that the device is
connected correctly and click on Refresh list. If this is not enough, try to unplug
and plug the xTAG adapter and use the Refresh list button again.
·
Click
Apply
to save the configuration.
XM011320A