xCORE-200 explorerKIT Hardware Manual
9/18
Connector
Pin 1
Port
Pin 2
Pin 3
J8
X0D22
P1G
+5V
GND
J9
X0D37
P1N
+5V
GND
J10
X0D35
P1L
+5V
GND
J11
X0D36
P1M
+5V
GND
J12
X0D34
P1K
+5V
GND
J13
X0D23
P1H
+5V
GND
Figure 13:
GPIO servo
connector
10
User LEDs
xCORE-200 explorerKIT provides two LEDs, a green LED and an RGD LED arranged
as shown below:
D1
D2
Figure 14:
User LEDs
The green LED and each colour terminal of the RGB LED are connected to a different
pin as described in Figure
15
:
Pin
Port
LED
X0D28
P4F0
Green
X0D29
P4F1
RGB (blue term)
X0D30
P4F2
RGB (green term)
X0D31
P4F3
RGB (red term)
Figure 15:
User LEDs
11
QSPI Flash
xCORE-200 explorerKIT provides 1Mbytes of Quad Serial Peripheral Interface (QSPI)
FLASH memory, which is interfaced by the GPIO connections shown in Figure
16
:
The xTIMEcomposer tools include the xFLASH utility for programming compiled
programs into the flash memory. xCORE-200 explorerKIT designs may also access
the FLASH memory at run-time by interfacing with the above pins.
XM007647C
