background image

Preface

VI

Preface

4.

Avoid interference.

 Keep the computer away from high capacity transformers, electric motors, and other strong mag-

netic fields. These can hinder proper performance and damage your data.

5.

Take care when using peripheral devices

.

Power Safety

The computer has specific power requirements:

Only use a power adapter approved for use with this computer.

Your AC adapter may be designed for international travel but it still requires a steady, uninterrupted power supply. If you are 
unsure of your local power specifications, consult your service representative or local power company.

The power adapter may have either a 2-prong or a 3-prong grounded plug. The third prong is an important safety feature; do 
not defeat its purpose. If you do not have access to a compatible outlet, have a qualified electrician install one.

When you want to unplug the power cord, be sure to disconnect it by the plug head, not by its wire.

Make sure the socket and any extension cord(s) you use can support the total current load of all the connected devices.

Before cleaning the computer, make sure it is disconnected from any external power supplies.

Use only approved brands of 
peripherals.

Unplug the power cord before 
attaching peripheral devices.

Do not plug in the power 
cord if you are wet.

Do not use the power cord if 
it is broken.

Do not place heavy objects 
on the power cord.

Power Safety 

Warning

Before you undertake
any upgrade proce-
dures, make sure that
you have turned off the
power, and discon-
nected all peripherals
and cables (including
telephone lines). It is
advisable to also re-
move your battery in
order to prevent acci-
dentally turning the
machine on.

Summary of Contents for P801
























Reviews: