2
U
SE
R
M
AN
U
AL
N
S6
/N
S1
2P
/N
S1
2P
F
Rear Panel layout
Installation requirements
The NS12PF Ethernet switch is designed for 19” rack-mount use.
Mount the NS12PF Ethernet switch with racking screws in a 19”
cabinet. Use support strips as necessary to support the rear of the
device.
Adequate ventilation and rear-support must be provided. Allow for
enough ventilation into the 19” cabinet in which the NS12PF Ethernet
switch is mounted. Observe the environmental specifications at all
times.
When mounting a NS12PF Ethernet switch in a touring rack, a touring
rack with shock-absorbing racking strips should always be used.
Always install the NS12PF Ethernet switch on a flat surface. A maxi-
mum allowable angle of 10 degrees is acceptable.
Do not use a NS12PF Ethernet switch in a wet/damp environment.
Do not block any ventilation slot at any time.
1
2
1
Fuse holder
2
Main power input
Chapter 4
Using the NS12PF
