NOTE: Leave 2 inches of the ground stake
above the ground
NOTE: Remove ground stake from rope
before hammering
Use a mallet to secure one of the ultra-strong ground stakes into the turf where your two points are marked out, taking care to leave
two inches of the stake visible above the ground. Make sure the wire setting rope is loose and is not trapped under or attached to the
ground stakes. Repeat steps three and four until you have six points.
When you’re done, pull the central base pole support out of the ground and remove the wire setting rope from underneath.
Then, use a mallet to properly secure the base pole support into the ground.
Star Tent
Assembly Instructions
www.xldisplays.co.uk
01733 511030
