XK-SAR : SAR90 / SAR360 Lighting System
Direct mode is used in a situation where directing traffic
is necessary, or even just when parked on the side of
the road and want to be more visible to oncoming traffic.
The Direct mode features 6 different directional settings.
The first three modes control the forward facing and rear
facing bars. The remaining three are a repeat of the first
three with the addition of the side facing bars. When
modes 4-6 are activated, the side bars will constant
strobe for additional lateral visibility if the on-road
situation requires. A detailed breakdown of all 6 of these
settings can be seen in the diagram to the right. Just as
the Strobe mode’s auto-memory, the Direct mode
features the same. Clicking out to another mode and
returning to Direct will recall the last of the 6 settings.
OTHER CONTROLLER FUNCTIONS
Change controller power-on default mode
Turn on the system and change to the mode you desire to save as power-on default. Hold the STROBE and DIRECT button
together for 3 seconds and release. The led indicator on the controller will blink 3 times. The current mode will be the default mode
next time you power up SAR system.
Controller reset
Turn on the controller, hold SOLID button for 5 seconds and release. The indicators will blink 5 times and the controller will be reset
back to factory setting.
SAR light bar reset
Turn on the SAR light bar. Hold the rubber indicator button on the back of the light bar for 5 seconds and release immediately. The
indicator will change to white color and the light bar will change back to factory setting.
