XJTAG XJLink2-CFM, User Manual, Page: 2 / 9

page 2 of 9 XJTAG-XCFM-Guide-22K-02.1 www.xjtag.com
www.xjtag.com
XJLink2-CFM .
User Guide
Table of Contents
SECTION PAGE
1. Introduction ..........................................................................................................3
2. Description of the XJLink2-CFM ...........................................................................3
3. Routing the Signals...............................................................................................4
4. Recommended Signal Routing .............................................................................6
5. Powering the Board..............................................................................................7
6. Configuring XJLink2-CFM Interface Voltages ........................................................7
Setting the Bank Voltages.................................................................................7
Interface Logic Voltage Characteristics .............................................................7
Configuring Output Pin Characteristics .............................................................8
7. Cable Restraints ...................................................................................................8
8. Specification.........................................................................................................9
USB Interface ...................................................................................................9
JTAG Signals ....................................................................................................9
Frequency Measurements.................................................................................9
Voltage Measurements .....................................................................................9
Figure 1. XJLink2-CFM Connectors .........................................................................................................3
Figure 2. Ribbon Cable Routing for the XJLink2 Signals...........................................................................5
Figure 3. Recommended Ribbon Cable Routing When Using all 18 Signals .............................................5
Figure 4. Distributing the XJLink2 Signals.................................................................................................5
Figure 5. Location of Mechanical Cable Anchor Points...........................................................................11
Table 1. Options for Software-Configurable Pins on J8 ............................................................................4
Table 2. XJLink2-CFM J12 Main Connector Pinout ..................................................................................6
Table 3. Recommended Signal Routing When Using all 18 Signals ..........................................................6
Table 4. Interface Logic Voltage Characteristics .......................................................................................7