Xitrix TravelPro SR-200 Series Page 21 Installation And Troubleshooting Manual Download | Manualshive

Page: 21 / 77

background image

LED Status Indicator

System & Power Status Indicators

LED Graphic

Symbol

Indication

Blue light indicates the WLAN module is active.

Persistent green light indicates the Silent mode is
enabled.
Blinking green light indicates the Suspend Mode is
enabled.

Blinking orange light indicates the battery is being
charged.
Blinking red light indicates the battery power is low when
the system is turned ON.
Persistent green light indicates the Power is ON.

Green light indicates the hard drive and/or optical drive is
being accessed.

6.

Wireless On/Off Switch

7.

Microphone/Audio Line-in Jack

8.

Stereo Headphone/SPDIF-out Jack

9.

4-in-1 Card Reader

The 4-in-1 Card Reader supports SD Card, MMC Card, MS and
MS-Pro Card.

10.

Touchpad Buttons

11.

Touch Pad

12.

Power / Suspend Button



Press momentarily to turn on the system.



Press and hold for at least 4 seconds to turn off the
system.



Press the power / suspend button again to return from
the suspend mode.



Persistent green light indicates the Power is ON

13.

Silent Mode Button

Pressing the key enables the system to lower its power usage;
therefore the fan speed is reduced to achieve lowest operating
noise. Persistent green light indicates the silent mode.

13

«
...
19
20
21
22
23
...
»

Summary of Contents for TravelPro SR-200 Series














































































Reviews:

No comments

Related manuals for TravelPro SR-200 Series

NP-Q1 User Manual (Vista)

Brand: Samsung Pages: 212

ThinkPad i Series

Brand: IBM Pages: 5

Thinkpad X30 Series

Brand: IBM Pages: 22

Brand: IBM Pages: 2

Toughbook CF-74JCL02AM

Brand: Panasonic Pages: 36

ThinkPad T40 series

Brand: IBM Pages: 188

Fairies Magic JC262i1

Brand: LEXIBOOK Pages: 32

Brand: Dell Pages: 66

Brand: Sony Pages: 2

Brand: Sony Pages: 458

Brand: Clevo Pages: 27

Brand: Clevo Pages: 104

Brand: ENHANCE Pages: 16

Brand: Tecknet Pages: 5

Brand: HCL Pages: 57

Brand: HCL Pages: 83

IBM ThinkPad I Series

Brand: SimpleTech Pages: 4

Latitude 7280 P28S

Brand: Dell Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands