XR-2425H Q uic k Insta lla tio n G uid e
- 2 0 -
Η δη ιουργβάικτ ωνεξωτερικο ρουστη ζ νησυ νοτ των 5470
–
5725 ΜΗz ε ιτρ ετάιωνο ετάά
όάδειά της ΕΕΤΤ, ου ορηγεβτάι στερά ά ό σ φωνη γν η του ΓΕΕΘΑ. Ερισσότερες λε τομ
ρειεωστο
www.eett.gr
Italy:
This product meets the National Radio Interface and the requirements specified in the
National Frequency Allocation Table for Italy. Unless this wireless LAN product is operating
within the boundaries of the owner’s property, its use requires a “general authorization.” Please
check with www.communicazioni.it/it/ for more details.
Questo prodotto é conforme alla specifiche di Interfaccia Radio Nazionali e rispetta il Piano Nazionale di
ripartizione delle frequenze in Italia. Se non viene installato all’interno del proprio fondo, l’utilizzo di
prodotti wireless LAN richiede una “autorizzazione Generale.” Consultare
www.communicazioni.it/it/
per maggiori dettagli.
Norway, Switzerland and Liechtenstein:
Although Norway, Switzerland and Liechtenstein are
not EU member states, the EU Directive 1999/5/EC has also been implemented in those
countries.
RF Exposure
Generic Information
The Xirrus Array products are designed to comply with the following national and
international standards on Human Exposure to Radio Frequencies:
US 47 Code of Federal Regulations Part 2 Subpart J
American National Standards Institute (ANSI) / Institute of Electrical and Electronic
Engineers / IEEE C 95.1 (99)
International Commission on Non Ionizing Radiation Protection (ICNIRP) 98
Ministry of Health (Canada) Safety Code 6. Limits on Human Exposure to Radio Frequency
Fields in the range from 3kHz to 300 GHz
Australia Radiation Protection Standard
To ensure compliance with various national and international Electromagnetic Field (EMF)
standards, the system should only be operated with Xirrus approved antennas and accessories.
Declaration on Conformity
This Array product has been found to be compliant to the requirements set forth in CFR 47
Section 1.1307 addressing RF Exposure from radio frequency devices as defined in Evaluating
Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic
Fields.
A minimum separation distance of 26 cm between the antenna and all persons is required
during normal operation.
