11
Procedure for Securing Low Level Array Access
Use the following steps to replace the default XBL username and password. These steps use
CLI commands.
1.
To access CLI via the WMI, click
CLI
under the
Tools
section on the left.
2.
If Xircon access at the XBL level is to be allowed, use the following three commands to
change the XBL username and password from the default values of
admin
/
admin
. In
the example below, replace
newusername
and
newpassword
with your desired entries.
Note that these entries are case-sensitive.
(config)#boot-env set username
newusername
(config)#boot-env set password
newpassword
(config)#save
3.
It is possible to change Xircon access permission to allow Xircon to access the Array at
the CLI level only, or at the XBL level only. See the
Xircon User Guide
for details.
Summary of Contents for XR-1000 Series
Page 1: ...XR Series Wireless Arrays XR 1000 Series January 30 2013 ...
Page 15: ......
