Wireless Access Point
568
Integrated Antennas
Xirrus Wireless APs (except for XA4 APs) employ integrated antennas that cannot
be removed and which are not user accessible. Nevertheless, as regulatory limits
are not the same throughout the EU, users may need to adjust the conducted
power setting for the radio to meet the EIRP limits applicable in their country or
region. Adjustments can be made from the product’s management interface —
either Web Management Interface (WMI) or Command Line Interface (CLI).
External Antennas (for XA4 only)
Operating Frequency
The operating frequency in a wireless LAN is determined by the access point. As
such, it is important that the access point is correctly configured to meet the local
regulations. See
in this section for more information.
If you still have questions regarding the compliance of Xirrus products or you
cannot find the information you are looking for, please contact us at:
Xirrus, Inc.
2101 Corporate Center Drive
!
WARNING
: In order to comply with radio frequency (RF) exposure
limits, the antennas for this product should be positioned no less than 34
cm from your body or nearby persons.
!
WARNING
: Do not locate the antenna near overhead power lines or other
electric light or power circuits, or where it can come into contact with such
circuits. When installing the antenna, take extreme care not to come into
contact with such circuits, because they may cause serious injury or death.
For proper installation and grounding of the antenna, please refer to
national and local codes (for example, U.S.:NFPA 70, National Electrical
Code, Article 810, Canada: Canadian Electrical Code, Section 54).
!
To reduce potential radio interference to other users, the antenna type and
its gain should be so chosen that the equivalent isotropically radiated
power (EIRP) is not more than that permitted for successful
communication.
