manualshive.com logo in svg

Xirrus Wi-Fi Array XN16, User Manual

Share
Download
Xirrus Wi-Fi Array XN16 User Manual Download Page 44

Wi-Fi Array

4

Introduction

applied, and provides a list of restricted characters. It also includes 
instructions for logging in to the Array with your Web browser.

z

Viewing Status on the Wi-Fi Array

Describes the status and statistics displays available on the Array using 
its embedded Web Management Interface. 

z

Configuring the Wi-Fi Array

Contains procedures for configuring the Array using its embedded Web 
Management Interface. 

z

Using Tools on the Wi-Fi Array

Contains procedures for using utility tools provided in the Web 
Management Interface. It includes procedures for upgrading the system 
firmware, uploading and downloading configurations and other files, 
using diagnostic tools, and resetting the Array to its factory defaults.

z

The Command Line Interface

Includes the commands and the command structure used by the Wi-Fi 
Array’s Command Line Interface (CLI), and provides a procedure for 
establishing a Telnet connection to the Array. This chapter also includes 
some sample key configuration tasks using the CLI.

z

Appendix A: Servicing the Wi-Fi Array

Contains procedures for servicing the Array, including the removal and 
reinstallation of major hardware components.

z

Appendix B: Quick Reference Guide

Contains the product’s factory default settings.

z

Appendix C: Technical Support

Offers guidance to resolve technical issues, including general hints and 
tips to enhance your product experience, and a procedure for isolating 
problems within an Array-enabled wireless network. Also includes 
Frequently Asked Questions (FAQs) and Xirrus contact information.

z

Glossary of Terms

Provides an explanation of terms directly related to Xirrus product 
technology, organized alphabetically.

Summary of Contents for Wi-Fi Array XN16








































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands