Xirrus Wi-Fi Array XN12, User Manual

Page: 168 / 190

Wi-Fi Array
148 Viewing Status on the Wi-Fi Array
Stations
This status-only window shows client stations currently visible to the Array. You
may choose to view only stations that have associated to the Array, or only
stations that are not associated, or both, by selecting the appropriate checkboxes
above the list. The list shows the MAC address of each station, its NetBIOS name,
its IP address, its manufacturer, the SSID used for the association, the
Group (if
any) that this station belongs to, the user name, its VLAN, its QoS, the IAP used
for the association, transmit and receive rates, the
RSSI for each station, and how
long each association has been active (up time).
You may click the Detail checkbox at the bottom of the window to show a number
of additional columns, including security settings used by the connection, the
channel and band used, and additional RF measurements.
Figure 64. Stations
You may sort the rows based on any column that has an active column header,
indicated when the mouse pointer changes to the hand icon . Click again to
reverse the sort order. You may select a specific station and perform one of the
following actions by clicking the associated button:

Deny Access: Sends a de-authentication frame to the selected station and
explicitly denies it access by adding its MAC address to the Deny List in
the Access Control List window. To permit access again, go to
“Access
Control List” on page 229 and delete the station from the Deny list.

Deauthenticate: Sends a de-authentication frame to the selected station.
The station may re-authenticate.
Click on the
Refresh
button to refresh the station list, or click in the
Auto Refresh
check box to instruct the Array to refresh this window automatically.
See Also
Access Control List
Station Status Windows