Jul-21, V1.1
Page
15
/
20
DEVICES
DEVICES
Emptying
The washing solution will be used up as soon as 180 g support
material has been dissolved in it (in case of 180 g VXL solve
detergent).
Tip: Keep track of the amount of support material
already dissolved, to replace the washing solution
timely.
Caution: When emptying, the provided protective gear
(safety glasses and protective gloves) must be worn to
prevent injuries.
Caution: Never empty hot washing solution while still
hot. Always wait until the washing solution cools down
to room temperature.
During the emptying process, make sure to perform the
following steps:
●
Switch off the heating/stirring rod and let the washing
solution cool down to room temperature.
●
Have an additional container (with a minimum capacity
of 10 L) ready.
●
Do not move the starter kit when filled under any
circumstances!
●
Insert the rigid rod of the provided siphon pump
completely into the starter kit via the small hole in the
lid, until it sits diagonally in the container and reaches
the bottom.
●
Close the venting valve of the siphon pump and make
sure that the flexible rod is introduced into the prepared
container. The exit of the pump must be located
underneath the level of the starter kit bottom.
