Xinpu XP-R26DA, Handling Instructions Manual

Page: 9 / 17

Outer diameter
11.0mm
12.3mm
12.7mm
14.3mm
14.5mm
17.5mm
21.5mm
{
13mm Rotary Hammer drill chuck
For drilling operations when using a drill bit with a rotary hammer.
+ +
(Drill bit) 13mm rotary hammer chuck
(SDS-plus shank)
2. Anchor setting (hammering only)
{
Anchor setting adapter (for rotary hammer)
+
Anchor setting adapter
(SDS-plus shank) (for rotary hammer )
Overall length: 160, 260mm
{
Anchor setting adapter (for manual hammer)
+
Anchor setting adapter
(for manual hammer)
3. Large hole boring (ro hammering)
{
Drill bit, core bit and core bit shank
+ + +
Drill bit Core bit Core bit shank
(SDS-plus shank)
Taper mode APPLICABLE DRILL BIT
Morse taper(No.1) Drill bit (taper shank) 11.0~17.5mm
Morse taper(No.2) Drill bit (taper shank) 21.5mm
A-taper
B-taper
Taper shank bit formed A-taper or B-taper is provided
as an optional accessory, but the drill bit for it is not
provided.
Anchor size
Φ
6 mm
Φ
8 mm
Φ
10 mm
Anchor size
Φ
6 mm
Φ
8 mm
Φ
10 mm
Φ
12 mm
Φ
16 mm