background image

GENERAL SAFETY RULES

 

WARNING

   

Read all safety warnings and all instructions

Failure to follow all  warnings  and instructions may 

result in electric shock, fire and/or serious injury.   

 

Save all warnings and instructions for future reference 

The term “power tool” in the warnings  refer  to your mains operated (corded) power tool or battery 

operated (cordless) power tool. 

 

1)

 

Work area 

 

a) Keep work area clean and well lit.

 

Cluttered and dark areas invite accidents. 

 

b)

 

Do not operate power tools in explosive atmospheres, such as in the presence of flammable 

liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. 

 

c)

 

Keep children and bystanders away while operating a power tool. Distractions can cause you to 
lose control. 

 

2)

 

Electrical safety 

 

a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any 

adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will 
reduce risk of electric shock. 

 

b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and 

refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. 

 

c)

 

  Do not expose power tools to rain or wet conditions. Water entering a power tool will increase 

the risk of electric shock. 

 

d)

 

Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. 
Keep cord away from heat, oil, sharp edges or moving parts. 
Damaged 

or 

entangled 

cords 

increase the risk of electric shock. 

 

e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. 

Use of a 

cord suitable for outdoor use reduces the risk of

 

electric shock. 

 

f)  If operating a power tools in a damp location is unavoidable, use a residual current device 

(RCD) protected supply. Use of an RCD reduces the risk of electric shock. 

 

3)

 

Personal safety 

a)

 

Stay alert, watch what you are doing and use common sense when operating a power tool. Do 

not use a power tool while you are tired or under the influence of drugs, alcohol or medication. 
A moment of inattention while operating power tools may result in serious personal injury. 
 

Summary of Contents for XP-R26DA


















Reviews: