background image

extremely hot and could burn your skin.

 

12

Any damage and abnormal happen, please stop to use immediately and disconnect it, ask authorized 

serve center to check and repair.

 

13. Parts replace:

 Only original can be used to replace by authorized service center.

 

14. Right use accessories and parts:

 Don't use other parts and accessories which not mentioned in the 

manual otherwise may cause injuries!

 

15. Special attention to voltage:

 Before connect the power tool, please make sure the rated voltage on 

the tool can match the power supply, otherwise the power tool may be damaged and cause injuries.

 

16. Don't wipe plastic part with solvent: 

Solvent such as gasoline, thinner, alcohol etc. these kind of 

chemical material,    are not allowed to use, water or soap are recommended! 

17. In case of damages the replacement of the plug or the supply cord shall always be carried out 
by the manufacturer of the tool or his service organization 

 

Residual risks 

Even when the power tool is used as prescribed it is not possible to eliminate all residual risk 
factors. The following hazards may arise in connection with the power tool’s construction and 
design: 

a)

 

Injuries and damage to property to due to broken accessories that are suddenly dashed.   

b)

 

Health defects resulting from vibration emission if the power tool is being used over longer period of 
time or not adequately managed and properly maintained. 

c)

 

Lung damage if don’t use dusk mask.   

d)

 

Hearing damage if don’t use ear protection. 

 Warning! 

This power tool produces an electromagnetic field during operation. This field may 

under some circumstances interfere with active or passive medical implants. To reduce the risk of 
serious or fatal injury, we recommend persons with medical implants to consult their physician and the 
medical implant manufacturer before operating this power tool. 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for XP-G90A















Reviews: