8
For low temperatures, the power tool reaches the full impact rate only after
a certain time.
This start-up time can be shortened by striking the chisel in the power tool
against the floor one time.
Mounting tool bits
Warning: before do it, make sure unplug the machine!
(1) Pull out of the retainer "2", turning 180
℃
clockwise
or anticlockwise, insert the accessory shank portion"1"
into the hole on the front cover.
(2) Turning the retainer back into original position.
Remarking:
When you removing the accessory, such as
a bull point, a cutter etc.., follow above procedure in
reverse order.
Indicator LEDS
The green power-ON indicator LED lights up when the tool is plugged. If indicator led does not
light up, the mains cord or the controller may be detective. The red service indicator LED lights
up when the carbon brushes are worn out to indicate that the tool needs servicing.
GREASE AND OIL FILLING
Warning!
Pull plug from power before any operations.
Demolition hammer mechanical part is easy to get worn and lose impact energy if
without enough lubrication, recommend filling grease and oil after 6 months usage. The
steps as follows:
