Xinje TS Series, Manual

Page: 19 / 27

5
setting functions are as follows:
Switch DIP1 DIP2 DIP3 DIP4 Function
Status
ON OFF OFF OFF Undefined
OFF ON OFF OFF USB flash disk import program
OFF OFF ON OFF Touch calibration
OFF OFF OFF ON Undefined
2. Communication port
(1) COM1 port pin definition:
Pin Name Explanation
1 NC Null signal
2 RXD RS232 communication receive data
3 TXD RS232 communication send data
4 A RS485 communication
5 GND Signal ground
6 NC Null signal
7 B RS485 communication signal -
8 NC Null signal
9 NC Null signal
(2) COM2 port pin definition:
Pin Name Explanation
1 TD+ RS422 communication send +
2 RXD RS232 communication receive data
3 TXD RS232 communication send data
4 A RS485 communication
Pin Name Explanation
5 GND Signal ground
6 TD- RS422 communication send -
7 B RS485 communication signal -
8 RDD- RS422 communication receive -
9 RDD+ RS422 communication r
3. USB-A port
TS5L series HMI is equipped with one USB-A (USB2.0) port as standard, which has the following functions:
realize backup management, complete data import and export functions, and the transmission rate reaches
480Mbps.
Pin Definition Explanation
1 +5V +5V voltage signal
2 DATA+ Data
﹢
signal
3 DATA- Data
﹣
signal
4 -5V -5V voltage signal (ground signal)
4. USB-B port
TS5L series HMI has a USB-B (USB2.0) port, which is located on the upper right side of the reverse side and
realizes the following functions: data download function, transmission rate up to 480Mbps.