TH series Touchscreen User Manual
Page 48 of 81
MANUL018R2V1
In this example, we use TH PLC port and PC serial com port3, so select PLC port com 3.
1. Click the button to see the lamp is ON/OFF.
Turn off the reverse button turn on the reverse button
Upon clicking the reverse button, the PLC output Y0 will switch ON/OFF at the same time.
There are two modes to download the project into the TH:
1. USB port and USB cable
USB port downloading:
Connect TH USB-B port and PC with USB cable, power on the TH, click
to download the
project.
2. COM1 port and Xinje special cable
COM1 port downloading
Change COM1 to download mode, please refer to chapter 4.3, power on the TH, click
to
download the project.
6-5 Downloading the project
