44
13
When you place the handset on the base, it
automatically turns on. To turn the handset
on or off in Standby mode, follow these
steps:
1.
,
press and hold the
key until you
switch the display on.
To turn on the handset when it's off
On power up, the
handset will enter subscription mode
and search for a registered base. A
m e s s a g e
a s
s h o w n
b e l o w
w i l l
b e
displayed to the user, and the Antenna
icon will flash.
Note
O u t
O f
R a n g e
:
If the handset is successful in finding a
base, the handset will enter the Standby
mode, the display will show handset
number or the handset name (if you have
one saved as described on page 24),
antenna icon, battery icon and current
time. If the handset is not successful in
finding a base, the handset will behave
a c c o r d i n g
t o
t h e
condition.
n
Turning Handset On/Off
2.
, keep the
key
pressed until the display turns off.
To turn the handset off
Note
YOU SHOULD FULLY
CHARGE THE HANDSET BEFORE USING.
:
Nothing will appear on the LCD when battery
power is very low.
Searching...
Restore Announce1/Announce2
Way 1: Using the menu
1. Press the
soft key in Standby mode.
2. Press the
soft key to choose
.
3. Press
soft key to choose
or
press the
key to choose
,
then press the
key to confirm.
4. Press the
key repeatedly to choose
,
press the
key to confirm.
5. The LCD will show
. Press the
key
to
restore
the
default
Announce1
/Announce2 or press the
key to cancel.
TAM
Select
Announce
Select
Announce1
Down
Announce2
Select
Default
Select
Confirm ?
Select
Back
Playback Announce1/Announce2
You can playback the current Announce1/2.
Way 1: Using the menu
Way 2: Using the base unit
1. Press the
soft key in Standby mode.
2. Press the
soft key to choose
.
3. Press
soft key to choose
or
press the
key to choose
,
then press the
key to confirm.
4. Press the
soft key to choose
.
5. The current Announce1/2 will be play. During
the process the
indicator will blink and
you can use the
soft key to stop and exit.
Press the
or
key on the base unit to
playback the current Announce1/Announce2. Use
the
key to end the playing at any time.
TAM
Select
Announce
Select
Announce1
Down
Announce2
Select
Select
Playback
In use
Back
Way 2: Using the base unit
Press
or
key to play Announce1/2, then
press and hold the
key to restore it to the
default one, you will hear a confirm tone. The
default Announce1 or Announce2 will be played
back after that.
