XingKeChuang XKC-C352, Instruction Manual

Page: 3 / 15

深圳市星科创科技有限公司
Shenzhen XingKeChuang Technology Co., Ltd.
Phone: 86-0755-33523599 FAX: 86-0755-33515410 URL: http://www.sz-xkc.com
Address: 11th Floor, No. 48, Xinyu Road, Xinqiao Community, Xinqiao Street, Baoan District, Shenzhen
3 / 15
4th.Correspondence diagram of signal input and relay output
input signal Load output
Alarm signal
status
Alarm Output
Low bit is 0, high bit is 0
Normally open end (NO)
is closed, normally closed
end (NC) is open
Loop
Low bit is 0, high
bit is 1
Normally open end (NO)
is closed, normally
closed end (NC) is open
The low bit is 1, the high
bit is 0
(The water level rises)
Normally open end (NO)
is closed, normally closed
end (NC) is open
High overflow is 1
Normally open end (NO)
is closed, normally closed
end (NC) is open
The low bit is 1, the high
bit is 1
Normally open (NO)
open, normally closed
(NC) closed
Alarm status, load output: normally open open,
normally closed closed
(Relay disconnected state, load disconnected to
enter protection)
The low bit is 1, the high
bit is 0
(Water level drops)
Normally open (NO)
open, normally closed
(NC) closed
Note: 0 means that the sensor cannot detect water and outputs a low-level 0V voltage, 1 means that the
sensor detects that there is water and outputs a high-level 12V voltage.
5th. Product selection model
XKC-C352-1P, (with 1 sensor);
XKC-C352-2P, (with 2 sensors);
XKC-C352-3P, (with 3 sensors);
XKC-C352-4P, (with 4 sensors);
6th. Basic function introduction
1. Automatic control of water inflow: the water level is lower than the low level sensor, the water pump is
automatically started, the water level rises to the high level, and the water pump is automatically turned off.