２４
FUNCTION
ALARM:
Magnetic, PIR or other external sensor devices can be used to signal the camera
reacting to an event.
INPUT
: Use this feature to designate dry contact
relays (OFF, N/O and N/C) for alarm input.
OUTPUT
: Set to ON to activate the relay output for
alarm.
PRESET
: Select the desired preset number for alarm
action.
HOLD TIME
: Set the dwell time of the relay output for
alarm output.(3~60seconds)
MOTION:
This camera has a feature that allows you to observe movements of objects on
the screen, and motion icon appears on the screen when movement is detected.
OPERATION
: Set to ON to enable the motion.
OUTPUT
: Select between the MARK or ALARM option.
PRESET
: Select the preset number for MOTION.
HOLD TIME
: Set the dwell time of the motion action.
SENSITIVITY:
Use this feature to select motion
sensitivity.
DETECT AREA
: Press right to enter the detect area.
A blue grid with 64 squares will appear. Choose the
desired area by moving the highlighting the specific
square colored in orange using arrow keys and
pressing the MENU key to change the color. The orange color means active and the green
color is inactive area.
Once all the desired areas have been designated, press and hold the MENU key until a set
of options appear.
ALL SET
: Select all area to be active.
AREA CLEAR:
Clear all area.
AREA SELECT:
Back to area select mode.
RETURN:
Exit the detect area.
Note
: Active detection area is colored in blue.
INPUT
OFF
OUTPUT
ON
PRESET
1<EMPTY>
HOLD TIME
5
RETURN
SAVE AND EXIT
ALARM SETUP
OPERATION
OFF
OUTPUT
MARK
PRESET
1
HOLD TIME
5
SENSITIVITY
MID
DETECT AREA
RETURN
SAVE AND EXIT
MOTION SETUP
ALL SET
AREA CLEAR
AREA SELECT
RETURN
MOTION SETUP
