２１
SPECIAL
The Special Setup is used to control the DAY/NIGHT, SENSING, SHARPNESS,
COMMUNICATION,ACCESS CONTROL, and FACTORY DEFAULT of the camera.
ACCESS CONTROL:
Use this mode to limit access to the Remote Controller
REMOCON
: The REMOTE CONTROL feature is set to ON for REMOTE CONTROL free
operating mode. But, if it is set to OFF, it is REMOTE CONTROL for limited operating mode.
PW CHECK
: The PASSWORD CHECK feature is set to ON, pressing MENU to enter the
main menu setup mode will display the password confirmation screen. The factory default for
the password is “9 PRESET 9 PRESET 9 PRESET 9 PRESET”.
CHANGEPW:
Use this feature to change password. Press number (1~9) and press
PRESET
key.
FACTORY DEFAULT:
To reset your camera to factory default condition.
REM OCON O N
PW CHECK OFF
CHANG E PW
RETURN
SAVE AND EXIT
ACCESS CO NTRO L
