NetDisk™ User Manual Network Direct Attached Storage / NDAS™
—————————————————————————————————————————————
(1)
Flip both dip switches up to USB Mode.
(2)
Connect NetDisk™ directly to your PC’s USB Port using included USB cable.
(3)
Make sure the power connector is connected firmly.
NetDisk
™
Mini Cable Installation
•
Turn on NetDisk™ Mini by sliding On / Off Switch to On position.
NDAS™ Mode
•
Connect NetDisk™ Mini to a switch (100 Base-T) with included Ethernet cable.
Wireless users: Connect NetDisk™ Mini to your wireless router or access point with included Ethernet
cable.
•
Make sure the power connector is connected firmly.
USB Mode
•
Connect NetDisk™ Mini directly to your PC’s USB Port using included USB cable.
NetDisk
™
Office
Cable Installation
•
Turn on NetDisk™ Office by sliding On / Off Switch to On position.
NDAS™ Mode
•
Connect your Computers Ethernet Port to one of the eight NetDisk™ Office’s Switch Port using
included Ethernet cable.
•
Make sure the power connector is connected firmly.
USB Mode
•
Connect NetDisk™ Office directly to your PC’s USB Port using included USB cable.
•
Make sure the power connector is connected firmly.
Note:
From this point forward, NetDisk™ will be used to represent NetDisk™, NetDisk
™
Mini and NetDisk
™
Office.
www.ximeta.de
—————————————————————————————————————————————
13