XIMEA xiQ ksi-kju, Manual

Page: 32 / 113

xiQ - Technical Manual Version 1.35 32
3.5.5. MQ022xG-CM
3.5.5.1. Sensor and camera parameters
xiQ model MQ022CG-CM MQ022MG-CM MQ022RG-CM
Sensor parameter
Brand CMV2000ES-3E5C1PP CMV2000ES-3E5M1PP CMV2000ES-3E12M1PP
Color filter RGB Bayer mosaic None None
Type Global shutter, overlap mode
Pixel Resolution (H × V) [pixel] 2048 × 1088, usable in color mode: 2040 x 1080
Active area size (H × V) [mm] 11.27 × 6
Sensor diagonal [mm] 12.8
Optical format [inch] 2/3
Pixel Size (H × V) [µm] 5.5 × 5.5
ADC resolution [bit] 10
FWC [ke-] 13.5
Dynamic range [dB] 60
SNR Max [dB] 41.3
Dark noise [e-] 13 (RMS)
Dark current [e-/s] 125 (25°C)
DSNU [LSB
10
/s] 3
Sensitivity [V/(Lux s)] 4.64
Camera parameters
Digitization [bit] 10
Supported bit resolutions [bit/pixel] 8, 10
Exposure time (EXP) 16.2µs to 1s
1
Variable Gain Range (VGA) [dB] 8.4
Refresh rate (MRR) [fps] 170
Supported standard readout modes Binning/skipping pixels fps Bit/px
0 1x1 2048 × 1088 170 8
1 1x1 2048 × 1088 85
2
10
Power consumption
typical [W] 1.5
Peak 3 [W]/[us] 4.4 / 20
Dimensions/Mass
height [mm] 26.4
width [mm] 26.4
depth [mm] 30.2 (with C/CS Mount module B)
25.2 (without C/CS Mount module B)
mass [g] 31.8 (with C/CS Mount module B)
27.8 (without C/CS Mount module B)
7.2 (board level camera)
table 3-16, MQ022xG-CM, sensor and camera parameters
Notes:
1)
Defined for max. bandwidth and 8bit per pixel. Higher dynamic range (i.e. 10 bit/pixel) will reduce the available
frame rate. By decreasing bandwidth the minimal exposure time and exposure step will increase.
2) Applies for 16bit per pixel on transport layer. When packing is enabled in camera the achievable FPS would be
higher.
3) Short peaks in drained power needed by sensor during pixel area reset