background image

© Copyright 2014 Xilinx, Inc. All Rights Reserved. 

XILINX, the Xilinx logo, the Brand Window and other designated brands included herein are trademarks of Xilinx, Inc. All other trademarks are the property of 

their respective owners. 

 

NOTICE OF DISCLAIMER: The information disclosed to you hereunder (the “Information”) is provided “AS-IS” with no warranty of any kind, express or implied. 

Xilinx does not assume any liability arising from your use of the Information. You are responsible for obtaining any rights you may require for your use of this 

Information. Xilinx reserves the right to make changes, at any time, to the Information without notice and at its sole discretion. Xilinx assumes no obligation to 

correct any errors contained in the Information or to advise you of any corrections or updates. Xilinx expressly disclaims any liability in connection with technical 

support or assistance that may be provided to you in connection with the Information. XILINX MAKES NO OTHER WARRANTIES, WHETHER EXPRESS, 

IMPLIED, OR STATUTORY, REGARDING THE INFORMATION, INCLUDING ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR 

PURPOSE, OR NONINFRINGEMENT OF THIRD-PARTY RIGHTS. 

 

Revision History 

Date 

Version  Description 

10/08/14 

9.0 

Recompiled for 2014.3. 

06/09/14 

8.0 

Recompiled for 2014.2. 

04/16/14 

7.0 

Recompiled for 2014.1. 

12/18/13 

6.0 

Recompiled for 2013.4. 

10/23/13 

5.0 

Recompiled for 2013.3.  

06/19/13 

4.0 

Recompiled for Vivado 2013.2. 

04/18/13 

3.2 

BIST contents updated. 

04/16/13 

3.1 

Added AR54225. 

04/03/13 

3.0 

Recompiled for 14.5. 

01/18/13 

2.1 

Minor Updates. 

12/18/12 

2.0 

Recompiled for 14.4. 

10/23/12 

1.0 

Initial version. 

Summary of Contents for ZC706
























Reviews: