manualshive.com logo in svg

Xilinx Virtex-II Pro PPC405, User Manual

Share
Download
Xilinx Virtex-II Pro PPC405 User Manual Download Page 88

396

www.xilinx.com

March 2002 Release

1-800-255-7778

Virtex-II Pro™ Platform FPGA Documentation

Chapter 3:

User Programming Model

R

OR and NOR Instructions

Table 3-30

 shows the PowerPC 

OR and NOR

 instructions. For each type of instruction 

shown, the “Operation” column indicates the Boolean operation performed. The column 
also shows, on an instruction-by-instruction basis, whether the CR0 field is updated.

Simplified mnemonics are provided for some common operations that use the OR and 
NOR instructions, such as move register and complement (not) register. See 

Other 

Simplified Mnemonics

, page 834

 for more information.

Table 3-29:

AND and NAND Instructions

Mnemonic

Name

Operation

Operand 

Syntax

AND Instructions

r

A is loaded with the logical result (

r

S) AND (

r

B).

and

AND

CR0 is 

not

 updated.

r

A,

r

S,

r

B

and.

AND and Record

CR0 is updated to reflect the result.

AND-Immediate Instructions

r

A is loaded with the logical result (

r

S) AND UIMM.

andi.

AND Immediate and Record

CR0 is updated to reflect the result.

r

A,

r

S,UIMM

AND Immediate-Shifted Instructions

r

A is loaded with the logical result (

r

S) AND (UIMM

||

0x0000)

andis.

AND Immediate Shifted and Record

CR0 is updated to reflect the result.

r

A,

r

S,UIMM

AND with Complement Instructions

r

A is loaded with the logical result (

r

S) AND 

¬

(

r

B).

andc

AND with Complement

CR0 is 

not

 updated.

r

A,

r

S,

r

B

andc.

AND with Complement and Record

CR0 is updated to reflect the result.

NAND Instructions

r

A is loaded with the logical result 

¬

((

r

S) AND (

r

B)).

nand

NAND

CR0 is 

not

 updated.

r

A,

r

S,

r

B

nand.

NAND and Record

CR0 is updated to reflect the result.

Table 3-30:

OR and NOR Instructions

Mnemonic

Name

Operation

Operand 

Syntax

NOR Instructions

r

A is loaded with the logical result 

¬

((

r

S) OR (

r

B)).

nor

NOR

CR0 is 

not

 updated.

r

A,

r

S,

r

B

nor.

NOR and Record

CR0 is updated to reflect the result.

OR Instructions

r

A is loaded with the logical result (

r

S) OR (

r

B).

or

OR

CR0 is 

not

 updated.

r

A,

r

S,

r

B

or.

OR and Record

CR0 is updated to reflect the result.

OR-Immediate Instructions

r

A is loaded with the logical result (

r

S) OR UIMM.

ori

OR Immediate

CR0 is 

not

 updated.

r

A,

r

S,UIMM

Summary of Contents for Virtex-II Pro PPC405



















































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands