10
Getting Started with the MicroBlaze Development Kit - Spartan-3E 1600E Edition
UG258 (v1.3) November 30, 2007
Chapter 1:
MicroBlaze Development Kit - Getting Started
R
a.
The serial configuration settings need to be set as follows:
-
Bits per second =
115200
-
Data bits =
8
-
Parity =
None
-
Stop bits =
1
-
Flow control =
None
6.
Turn on the SP3E1600E board’s main power switch. If the configuration jumpers are
set to Master Serial mode, then the Hello World Demo will automatically start.
7.
To restart or load another demo, set the configuration jumpers to the proper settings
for the desired demo, and depress the PROG pushbutton or simply power-cycle the
main power switch.
a.
The selected demo will load from the appropriate PROM and the DONE LED will
light upon completion of the download.
www.BDTIC.com/XILINX
