28
1.
Before going online, you must map your devices and save your project.
2.
Select the red “Load Design to Device(s)” button at the top of the Project View work area.
3.
A box will appear. Select your desired devices and click “Ok” to load your design to your device(s).
4.
Once complete, you are in Online Mode.
Note that the dotted work area is now a solid color. This indicates that you are in online mode.
Also, the previous ‘Load Design to Device(s)’ button has now changed ‘Switch to Design Mode’.
Switching from Online mode to Design mode:
You cannot make changes to the Mini devices while in Online Mode. That can only be accomplished while
in Design Mode. But you can make adjustments to the processors DSP module parameters while in Online
Mode thus you will see a permissions window upon switching back to Design Mode from Online Mode.
NeuPanel: Online mode