XIEGU X108G, Operating Instructions Manual

Page: 6 / 15

~ 6 ~
【
ATT
】
Switch receive signal attenuator on or off.
【
PRE
】
Switch receive preamp on or off.
【
MODE
】
Select desired operating mode – CW/AM/LSB/USB.
【
AGC
】
Select AGC level – FAST/SLOW/OFF.
【
NB
】
Select NB level between 1 and 4.
【
A/B
】
Switch between VFO A & VFO B.
【
A=B
】
Set VFO A the same as VFO B.
【
SPLT
】
Select SPLIT operating mode.
【
RIT
】
Select RIT mode – adjust via selector knob B, setting shown on RIT display in OLED.
【
POW
】
Set RF output power – adjust via selector knob B,
level displayed via red line in OLED
【
V/M
】
Select VFO or Memory mode. Select channel/frequency using selector knob B.
【
M>V
】
In memory mode, move current frequency to VFO and switch to VFO mode.
【
MW
】
In VFO mode, store current frequency and settings in memory.
【
MC
】
In memory mode, clear selected memory channel.