XIEGU X108G, Operating Instructions Manual

Page: 13 / 15

~ 13 ~
To enter menu setting mode: Power off radio. Press and hold F1 button while powering on.
1. IF SSB: SSB IF
2. IF CW: CW IF
3. BFO LSB: BFO value LSB mode
4. BFO USB: BFO value USB mode
5. BFO CW: BFO value of the CW mode
6. CW Tone: CW side tone pitch frequency
adjustment
7. CW TDly: CW launch delay
8. TOT:
9. Britns:
10. DDSCLK: System Clock
11. DCLKx6: DDS multiplier settings
12.
System Audio Settings
13. F1 Custom set key
14. F2 Custom set key
Item 1 to 5, cannot be freely modified, otherwise it will lead to the transceiver
exception or even not work.
Item 6, for CW Receiving side tone pitch adjustment. Users can according to their
preferences and habits, adjusting CW side tone.
Item 7, for CW transceiver delay. Users can operate according to their own habits,
appropriate changes this parameter to match the transmitters speed.
Item 12, Audio settings for the system, If the system beep or CW side tone is too high,
then you can to adjust your volume size by item.
n
Press the frequency Key, choose current item.
n
Press the "up" or "down" button in the Mic, can select different items.
n
Via the Mic keypad Can direct input any value.
n
After setting, press save key to save and to automatic withdrawal.
n
If press Exit ,
not save.