Page 18
S
ETTING THE START
-
UP DISPLAY TEXT
(C
ALL
S
IGN
):
Your radio station call sign can be displayed on the G106’s startup screen.
To do this, follow these steps:
1.
Call the multi-function menu [3/5], CSN function to edit the
startup interface.
2.
The three function buttons on the editor are as follows:
QUIT: give up editing and exit
BACK: delete the last character
SAVE: save and exit
3.
Turn the main tuning knob to choose the desired character
and press the main knob in to select the character.
4.
Press the SAVE button to save and exit. The information you
set will now be displayed at startup the next time you turn
the radio on.
G106 operational display definition:
The display of G106 can be set to display different content as follows:
1. Access the multi-function menu [4/5], DIS function to go to the display
mode selection where three options are available SCOPE+S, SCOPE and BIG
SCOPE:
SCOPE+S: displays sp signal strength S value
SCOPE: displays spectrum only
BIG SCOPE: displays a larger format spectrum
2. Turn the main knob to select the desired display mode, press SAVE to
save and exit. About 5s later, the interface will automatically switch to the
normal display state.
Tip:
If the display menu is already shown, you may short-press the main
tuning knob to quickly return to the spectrum display state.
Enable / disable keypad tone:
Access the multi-function menu [4/5], BP function and press the BP function
button again to enable or disable the keypad tone.
