Page 16
A
NTENNA
:
The G106 requires an antenna that is resonant on the frequency in use. For
“wide-banded” non-resonant antennas an external ATU is required.
L
ISTENING TO
FM
B
ROADCAST STATIONS WITH THE
G106
To have the G106 receive local VHF FM broadcast stations follow these steps:
1. Access the multi-function menu [5/5] and select the WFM function.
2. Functions of buttons while in Wide band FM receive mode:
①
</> button at the bottom of the screen: tune up and
down the FM band to automatically search for radio
stations. Automatically store the radio stations found
and stop.
②
QUIT: Quit FM radio.
③
Main tuning knob: Manually adjust the radio frequency.
④
BAND left and right buttons: Switch between the radio stations
that have been automatically stored.
⑤
Use the volume knob to change the volume.
View Software (Firmware) version information:
Access
the multi-function menu [4/5] VER function to go to the firmware
version information display. The information is displayed as follows
(example – with v1.3 firmware this will show v1.3):
Press any button to exit the display.
