Xibu inoxDISINFECT, Manual

Page: 3 / 12

FOR THE UNITED STATES ONLY
General Safety Information
The following symbols and headings are used throughout this manual to indicate possible hazards to
persons or equipment. The symbols and headings are shown in order of importance. For efficient and safe
operation, be sure to follow the installation and operating instructions provided in this manual. In particular,
all safety symbols and notices must be followed.
Indicates a potentially hazardous situation which, if
not avoided, could result in serious injury or death.
Indicates a potentially hazardous situation which, if
not avoided, could result in minor personal injury.
This safety warning indicates possible hazards to
the product or to other equipment.
Vital information or tips for the installer or operator.
IMPORTANT
General Safety Instructions
When installing any equipment, ensure that all
national and local safety, electrical and plumbing
codes are met.
When using electrical appliances, basic safety
precautions should always be followed.
Always wear safety goggles to protect your eyes
and wear other appropriate safety items for pro-
tection to avoid injury when drilling.
CAUTION
IMPORTANT
- Do not mix old and new batteries. Always remove exhausted batteries and dispose safely.
- Americans with Disabilities Act: Title III of the Americans with Disabilities Act (ADA) governs, in de-
tail, the placement and operation of dispensers. You should ensure that your mounting and use of
dispensers complies with that law as well as the regulations issued under that statute. The moun-
ting suggestions in this document may or may not fulfill the obligations of the ADA with respect to
your facility.
WARNING
CAUTION
NOTICE
For HAGLEITNER senseMANAGEMENT devices only
NOTE This equipment has been tested and found to comply with the limits for a Class B digital de-
vice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable pro-
tection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that in-
terference will not occur in a particular installation. If this equipment does cause harmful interfe-
rence to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is con-
nected.
—Consult the dealer or an experienced radio/TV technician for help
IMPORTANT: This product, when installed as specified in this manual, meets FCC requirements. Mo-
difications not expressly approved by the manufacturer may void your authorization, granted by the
FCC, to use the product. Failure to follow all installation instructions could void your FCC authorizati-
on to use the product in the USA.