4. Description of automatic mode control (advanced mode)
This mode is advanced mode, which is more
difficult and can be used completely without
the remote control. It is recommended for
users who have good sports coordination or
have walking machine experience.
Mode switch:
Short press: switch to the fixed speed mode
Long press: switch to the standby mode
Automatic Mode
04 Learn to use WalkingPad
5. Remote Controller Notice
If the remote controller has no
response or you change a new
one, The remote controller and
walking device need to
re-establishing communication.
Pairing method: Restart walking
device and short press the
MODE Button of Controller many
times during display "WAIT".
6. Fault Waming Linght
The Fault Warning Light is off when the
walking machine is working well. While
error occurs, the fault warning light is on
and the display panel shows the error code
E01:Drive communication fault
E02:Motor abnormalities
E05:Overcurrent protection
E06:Motor Protection
E08:Sensor Fault
E10:
High temperature protection, automatic
recovery after the end of countdown.
E11:
Overload protection, please add lubricating
oil, and resume automatically after countdown.
Entering this area, the
WalkingPad will slow
down automatically
under the automatic
mode.
Entering this area, the
WalkingPad will start
or accelerate under
the automatic mode.
11
12
Short press: stop the
WalkingPad
.
Under this automatic mode,
set as the intelligent start
and stop, the WalkingPad
will start automatically to the
target speed(default is
1.75 mi/hr) while entering this
area.
Summary of Contents for WalkingPad WPA1F
Page 13: ......