Xiaomi S10, User Manual, Page: 10 / 189

08
Notes:
For cleaning and maintaining the 2-in-1 dust compartment with water tank & mop
pad assembly, please refer to the labels on the tank and mop pad holder.
It is recommended to clean the cliff sensor every three months with a soft cloth.
Please refer to the table for accessory replacements to ensure the optimal
cleaning effect.
1. Remove the side brush.
2. Press and hold the clips to remove the brush cover, then remove the
brush, and pull out the brush bearing.
3. Use the cleaning brush to clean.
Brush and Side Brush
Cleaning the Brush
Cut the hair Remove dirt and debris
Clip
Brush Cover
Brush
Brush Bearing
Side Brush
Care & Maintenance
Press and hold the
clips to remove.
Side brush
Components Maintenance Frequency Replacement Frequency
Brush
Filter
Brush cover
Every 3–6 months
Every 6–12 months
Every 3–6 months
Every 3–6 months (or upon worn) Every two weeks
Weekly
Weekly
/
Mop pad
Every 3–6 months (or upon worn) After each use
When the robot vacuum is running, press any button to pause. Press the
button to resume cleaning.
Note: The robot vacuum will enter sleep mode after being paused or in standby mode
for five minutes. Press any button to wake it up.
Pausing
When the robot vacuum is working, pause it first then remove the 2-in-1
dust compartment with water tank to add water or clean the mop pad.
Then reinstall the 2-in-1 dust compartment with water tank and press the
button to resume the task.
Adding Water or Cleaning the Mop Pad
When the robot vacuum is working, press the button to pause the task,
and press the button again to send the robot vacuum to return to the
dock to charge.
When the robot vacuum is in standby mode and not connected to the
charging dock, press the button to send the robot vacuum to return to
the dock to charge. When a task is complete or the battery is too low, the
robot vacuum will automatically return to the dock to charge.
Docking & Charging
In the do not disturb (DND) mode, the robot vacuum does not resume
cleanup, perform scheduled cleanups or play voice prompts, and the
indicator turns off after one minute of charging. The DND mode can be
enabled or disabled in the app.
Note: Please refer to the app for more features, including Clean There, Resume
Cleanup, Scheduled Cleanup, and Virtual Walls.
DND mode
Notes:
When using the robot vacuum for the first time, please follow the in-app prompts to
complete quick map creation. To ensure accurate mapping, it is recommended to
follow the robot vacuum and remove any obstacles on the ground when it is creating
the map. Make sure the robot vacuum starts from the charging dock.
If the robot vacuum may get stuck or scratch the surface of the furniture in some
areas, you can set restricted areas in the app to prevent the robot vacuum from
entering those areas.